SCM GROUP
SCM GROUP SpA
| 3 | D12-E13 / E10-F11 |
Products
02.02.04.01
Hand-fed cycle presses
02.02.04.03
Block cycle presses for laminating
02.02.04.04
Cycle presses for laminating of moulded parts
02.02.04.05
Membrane presses
02.02.10
Equipment for glue preparation, proportioning and transport
02.03.02.02
Radial arm saws
02.03.06
Single blade circular saws with moving saw unit
02.03.07
Single- and multi-blade circular saws for edging or ripping
02.03.10
Sliding table saws
02.03.11
Vertical panel saws
02.03.12.01
Horizontal panel saws with pressure beam for longitudinal cuts
02.03.12.02
Horizontal panel saws with pressure beam for cross cuts
02.03.12.03
Horizontal panel saws with pressure beam for longitudinal and cross cuts (angular system)
02.03.14
Narrow band saws
02.03.21
Optimizing rip saws
02.04.01
Surface planers
02.04.02
Thickness planers
02.04.03
Scraper machines
02.04.04
Planing / sawing machines
02.04.06
Angular-edge surface planers for surfacing and jointing in one operation
02.04.07
Two-side thicknessing planers for surfacing and thicknessing in one operation
02.04.08
Three- and four-side planers
02.04.09
Moulding machines for three-and four-side machining
02.04.11
Single-spindle moulders
02.06.01.01
Single-end tenoners for straight tenons
02.06.01.02
Double-end tenoners for straight tenons
02.06.02.01
Single round end tenoners
02.06.02.02
Double round end tenoners
02.07.01
Single−end profilers / sizing machines for non−flat parts, e.g. scantlings
02.07.02
Single−end profilers / sizing machines for flat parts, e.g. panels
02.07.03
Double−end profilers / sizing machines for non−flat parts, e.g. scantlings
02.07.04
Double−end profilers / sizing machines for flat parts, e.g. panels
02.08.01.01
Single-end edge banding machines for straight edges
02.08.01.02
Single-end edge banding machines for softforming
02.08.01.03
Single-end edge banding machines for shaped / curved parts
02.08.02.01
Double-end edge banding machines for straight edges
02.08.02.02
Double-end edge banding machines for softforming
02.08.02.03
Double-end edge banding machines for shaped / curved parts
02.08.03
Table edge banding machines
02.09.01.01
Single-end sizing and edge banding machines for straight edges
02.09.01.02
Single-end sizing and edge banding machines for softforming
02.09.01.03
Single-end sizing and edge banding machines for shaped / curved parts
02.09.02.01
Double-end sizing and edge banding machines for straight edges
02.09.02.02
Double-end sizing and edge banding machines for softforming
02.09.02.03
Double-end sizing and edge banding machines for shaped / curved parts
02.10.02.01
Postforming machines for laminates
02.10.02.02
Direct-postforming machines for laminated / veneered panels
02.11.02
Mitre cutting machines for cross-folding
02.12.01.01
Universal multispindle boring machines, stationary processing
02.12.01.02
Multispindle boring machines with horizontal and / or vertical heads, stationary processing
02.12.01.03
Through feed multi-spindle boring machines with horizontal and / or vertical heads
02.12.02
Dowel hole boring machines for rack, frame and other prismatic components, stationary or through feed processing
02.12.03
Boring machines for sawing, moulding, boring and dowel-driving
02.12.04
Machines for boring, milling, hardware inserting, etc.
02.12.05.01
CNC boring machines for stationary processing
02.12.05.02
Through feed CNC boring machines
02.12.06
Dowel driving machines (gluing, driving-in)
02.12.07
Machines for hardware inserting
02.15.03
Profiling lathes
02.15.04
Copying lathes with tool control by template
02.15.05
CNC lathes
02.16.01
Longbelt sanders with table
02.16.03
Wide-belt sanders
02.16.04
Cross-belt / wide-belt sanders
02.16.05
Veneer sheet sanders
02.16.06
Abrasive calibrating machines
02.16.07
Wide-belt sanders for calibrating and sanding
02.16.08
Drum sanders for surface sanding
02.16.10
Sanders for intermediate lacquer sanding
02.16.13
Belt sanders
02.19.01
Surfacers and thicknessers
02.19.02
Combined circular saws and moulders
02.19.04
Combined circular saws, surfacers, moulders and slot mortisers
02.19.05
Universal combined machines for carpentry and joinery
02.19.06
Universal combined machines for DIY
02.19.99
Combined machines; other
02.20.01
Machining centres for sawing, routing, profiling, boring, sanding
02.20.02
Machining centres for edge-banding
02.20.03
Machining centres for routing, sawing, boring, edge banding
02.20.04
Machining centres for routing, sawing, boring, hardware and dowel inserting, etc.
02.21
Manufacturing cells
02.22.01
Vertical edge joint gluing machines
02.22.04
Laminated timber presses / clamps for construction timber, glulam, etc.
02.23.02
Frame clamps
03.01.01.02
Texturing / brushing machines
03.01.01.03
Cleaning brushes
03.01.02
Bleaching and staining plants
03.01.04
Printing (e.g. wood grain) plants
03.01.05
Automatic spraying machines / robots for spray finishing
03.01.06
Rotation spraying systems
03.01.08
Curtain coaters
03.01.09
Roller coaters
03.01.12
Flooding systems
03.01.13
Edge coating systems
03.01.15
Spray walls and booths
03.01.16
Lacquer drying and curing lines
03.01.17
Conveyers for lacquering plants
03.03
Machines and equipment for pyrography or marking
04.01.02.01
Glue spreading stations for carcass components
04.01.02.02
Pre-clamping station
04.01.02.03
Carcass clamps
04.01.03
Final assembly work stations for furniture parts, carcass furniture
04.01.04
Final assembly lines for furniture
04.01.99
Assembly systems; other
04.03.01
Packaging machines for furniture parts and carcass furniture
04.03.02
Packaging machines for flat parts (floor elements, panels, etc.)
04.03.03
Packaging machines for boards, custom sized boards, etc.
04.03.99
Packaging machines; other
05.01.05
Vacuum lifting equipment
05.01.06
Infeed units
05.01.07
Outfeed and stacking units
05.01.08
Board turning stations
05.01.09
Angle transfer stations
05.01.10
Cross conveyors
05.01.11
Reverse conveyors
05.01.12.01
Driven roller conveyors
05.01.12.02
Undriven roller conveyors
05.01.13
Belt conveyors
05.01.17
Roller stands
05.01.90.99
Specialised materials handling technology; other
06.01
Robots for handling, feeding and palleting, etc.
06.03
Robots for spraying, lacquering, etc.
10.01
Laser technology
10.03
Microwave technology
10.04
Supersonic technology
11.01.01.01
Processing centres for longitudinal and cross-wise processing of window parts
11.01.01.99
Machines for windows and facades; other
11.01.02
Machines and plants for doors and frames
11.01.03.01
Trimming lines
11.01.03.02
Special machines for carpenters and building industry
11.01.04.01
Assembly tables
11.01.04.02
Automatic nailers for wall units, etc.
11.01.04.03
Machining centres for structural elements
11.01.05
Machines and equipment for glue laminated timber / glulam construction
11.01.06
Machines and equipment for timber flooring / parquetry
11.01.07
Machines and equipment for laminate floorings
11.01.08
Machines and equipment for stair construction
11.02
Machines and equipment for manufacturing solid timber boards
11.03
Machines and equipment for manufacturing rack furniture (chairs, tables, etc.)
11.05
Machines and equipment for manufacturing doors for furniture
11.06
Machines and equipment for manufacturing drawers
11.09.01
Machines for manufacturing insulating materials
11.99.07
Machines and plants for furniture handles
11.99.08
Machines and plants for louvres and shutters
11.99.09
Machines and plants for coffins
11.99.10
Machines and plants for shuttering panels
80.01.04
General contractors for particle board, fibre board and OSB production plants
80.01.05
General contractors for furniture production plants
80.01.06
General contractors for solid wood processing plants
80.01.07
General contractors for plants for manufacturing of wooden construction elements (windows, facades, etc.)
80.01.08
General contractors for timber construction and wooden houses
80.01.09
General contractors for laminate flooring plants
80.01.10
General contractors for solid wood parquetry plants
80.01.11
General contractors for plants for solid wood panel production
80.01.99
General contractors, other
90.03
Independent software for particle board, fibre board and OSB production
90.05
Independent software for solid wood processing
90.06
Independent software for the furniture industry
90.07
Independent software for window construction
90.08
Independent software for timber construction
90.09
Independent software for the craft business
90.10
Independent software for stair construction
95.01.04
Independent engineering and consulting services for particle board, fibre board and OSB production
95.01.05
Independent engineering and consulting services for the furniture industry
95.01.07
Independent engineering and consulting services for solid wood processing
95.01.08
Independent engineering and consulting services for windows and facades
95.01.09
Independent engineering and consulting services for timber construction
95.01.10
Independent engineering and consulting services for craft business
95.01.11
Independent engineering and consulting services for surface finishing
